Ropes Edge logo
Title Image

The Edge90°

A ROPE ACCESS SHARP EDGE MANAGEMENT SYSTEM

The Edge90°

The increased bend radius ensures maximum strength retention of the rope or sling that is used within it.

Use

The Edge90° have been designed for use with nylon kernmantle rope or nylon slings as a physical barrier to a potential hazard or an abrupt 90° bend.

carabiner 100

Weight

The Edge90° should not be used if the potential load on the product could exceed 250 kg.

Load Distribution

The Edge90° has a grippy rubber base to distribute the load & forces on the parapet and maintain its position during installation, removal, and normal use.

The Edge90° Parapet Clamp is designed for use on varying sizes, depths and materials of parapets and on  other 90° edges, commonly found on high-rise buildings  and on industrial work sites. It should only be used it is not  possible to “remove” or “avoid” a hazard.

In Industrial Rope Access, all rigging equipment and ropes shall be rigged in such a way to remove or avoid potential hazards that  threaten the integrity of the life supporting system.  

The Edge90° Parapet Clamp is designed to remain firmly in place under the weight of the worker or load. 

Designed for the Rope Access & the Rope Rescue industry, The Edge90° Parapet Clamp saves time, effort, wear on your ropes and makes the edge negotiation safer and more efficient!

The Edge90

Key Features include:

 

– 7 second installation
– 3 x Bend Radius
– 100% Rope retention system
– No Velcro!
– More #rope in play during transition
– Parapet Clamp that helps protect again unintended movement..
– Parapet Protecting base
– Ultra high efficiency when hauling slack ropes at the end of each abseil.
– Multiple Applications. Separate the cam-strap & use as a single unit.
– Ultra lite & low profile design helps with fatigue and edge negotiation.
No more multi layered “protectors” involving a piece of wood & your fave shag carpet that can take upwards of 20 mins to instal, only to have move again to the next drop & that only provide a limited level of reliable “protection” to begin with..
Thus being the major benefits of the Edge90° is that it takes less time to instal and negotiate than the multiple layers of carpet, the large heavy & edge rollers that require significant time & attention to properly get into place.. plus with the Edge90°’s Clamping Force, the barrier stays where you want it to without damaging the building that you’re working on..!
The Edge - Ropes Edge
Edge - Rope Access _ Ropes Edge

Providing Easy To Use Edge Management Systems For The Technicians That Use Them Every Day

The Rope Retention system (clevis pin) keeps the ropes securely within the protector during normal use.

Additional attachment holes for accessory cord tie-back points if needed. - Center channel hole for securing the Egde90° to anything that will accept it with a screw or bolt. - Stainless Steel Roller Bearings reduce friction during hauls & lowers of weighted or unweighted rope.

RFID location tracking system tags can be added to ALL Ropes Edge products. Date of manufacture on each unit.

The Edge90
edge90 1
edge90 2
edge90 3
edge90 4

The normal life Span of The Edge90° is 10 years from manufacture date or 5 years from first use, and entirely dependent on passing daily use checks and regular inspections.

MATERIAL – PA 12 NYLON

PA 12 NYLON PROPERTIES

MELTING POINT

175° C

TENSILE STRENGTH

48 Mpa / 6960 psi

ELONGATION

20%

IMPACT RESISTANT

to 1247 flbs/ sq. inch

LOW TEMP LIMIT

-40°C in short term duration

The Edge90° will not protect you or your rope from HOT surfaces of any kind.Normal avoidance practices of hot surfaces in Rope Access shall be observed while using The Edge90° and the RopesEdge line of products.

THE EDGE90° – TECH DATA SHEET – PDF

THE EDGE90° – VIDEOS